×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Hunting in CUCM 6.1.2

Unanswered Question
Oct 26th, 2009
User Badges:

Hi,


I need assistance in the Hunting settings


we are using CUCM 6.1.2 ,the hunting is working good.

But i want to customize the settings


Required

========

1.When the members of the Line Group dial outside for Internal extension (CUG) calls . It should Only display the Text "XYZ Team"


2.For Incoming calls coming to that Line group. it should display the DN of the calling Party.


Tried:

=====

1.I tried the Internal alerting, caller Id parameters.But it shows the DN(EXTN) in Braces

eg: XYZ(1234)

2.Tried CLI Resticted option in Hunt Pilot getting Only "PRIVATE" for both incoming and Outcoming.


Looking for the solution


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
dc-csa-chn Tue, 10/27/2009 - 03:50
User Badges:

Hi,

As Per document

i have created a Translation Pattern for Hunt Pilot .

In Translation Pattern

=======================


1. I tried Calling Name Presentation -Allowed

2.I tried Connected name Presentation

-allowed

While Calling and Connected Line ID are in restricted.


I am able to see the incoming calls calling the Translation Pattern

Calling Party --- Private

Called Party --- DN of calling Party.


It's Good.


When i am making an outbound call from the line group to calling Party through directory,

It shows


Calling Party --Extension

Called Party --XYX (DN)


Need assistance for the Outbound calls.


Thanks






Actions

This Discussion