We have a one location still running 3 IOS based AIR-AP1231G-A-K9 APs and 1 WDS running c1200-k9w7-mx.123-7.JA3. 1 Guest open ssid and 1 EAP-FAST ssid, authenticating to ACS Appliance V3.3. Has been working fine for multiple years until a recent power shutdown and restore.
The wireless clients authenticate properly but since the power outage the ACS Radius Passed Authentication log is constantly filled with ap_infra_device entries, multiple per second. Shut the radios down, and reset the WDS, same condition.
Debug wds aaa
Pick method list 'method_225_ap_infra'
WDS Statistics for last 1w3d:
Current AP count: 3
Current MN count: 2
AAA Auth Attempt count: 41
AAA Auth Success count: 516791
AAA Auth Failure count: 4
MAC Spoofing Block count: 0
Roaming without AAA Auth count: 4
Roaming with full AAA Auth count:4
Fast Secured Roaming count: 0
MSC Failure count: 0
KSC Failure count: 0
MIC Failure count: 0
RN Mismatch count: 0
Apprehensive to upgrade since EAP-FAST is functioning and will migrate to HREAP when we can forklift the 1231s.
Can provide debugs. Can anyone help?