ACL logging on Cisco Catalyst 2960G ???

Answered Question
Oct 26th, 2009

I would like to logging the ACL on Cisco 2960G switch. I created an extended ACL and I added the next line from the aim of testing (deny ip any any log). It is good working but it doesn't logging.

I configured 'logging on ; logging buffer etc...'.


Is it possible the ACL logging in switch or not?

If it isn't possible, then How can i logging incoming package information in switch.?


Data sheet:

IOS version 12.2(25)SEE2

Cisco Catalyst 2960G


Thank you for the help to everybody.

Correct Answer by simontibbitts about 7 years 4 months ago

Hello.


Please see this link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_see/configuration/guide/swacl.html#wp1031180


It does not support ACL logging.


I think your best bet would be to mirror traffic to a sniffer and your sniffer can keep track of incoming traffic.


Simon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
bozsikjanos Tue, 10/27/2009 - 01:03

Hy, Simon


Thank you for your help.

I understand it by now.


Bozsik Janos

Actions

This Discussion