Hi
I am experiencing an issue with MGCP dial-peers in that when my router loses & regains the connection with Call Manager the MGCP dial-peers alter position in the running config.
e.g. :
Normal Operation
dial-peer voice 999100 pots
service mgcpapp
port 1/0/0
!
dial-peer voice 999101 pots
service mgcpapp
port 1/0/1
!
!
dial-peer voice 9 pots
destination-pattern 9[2-8].....
port 1/0/4
forward-digits 6
!
dial-peer voice 90 pots
destination-pattern 90..........
port 1/0/4
forward-digits 11
!
After router loses WAN link
!
dial-peer voice 9 pots
destination-pattern 9[2-8].....
port 1/0/4
forward-digits 6
!
dial-peer voice 90 pots
destination-pattern 90..........
port 1/0/4
forward-digits 11
!
dial-peer voice 999100 pots
service mgcpapp
port 1/0/0
!
dial-peer voice 999101 pots
service mgcpapp
port 1/0/1
The problem is highlighted by the fact that FXs ports are not controlled via MGCP & they look to the pots dial peers for out going access only.
I am running CCM ver 7 / router IOS ver 12.4(9)T7 / MGCP vere 0.1
I know I may require an IOS upgrade but I would be interested if anyone has experienced this.
Any help would be appreciated.
Thanks.
