Hot to set up SIP ICT (inter Cluster Trunk)

amitbatra · ‎10-26-2009

Hi Guys,

I need some help on how to set up SIP ICT between to CUCM 6.1 bussiness edition...any document on inputs will be very helpful..

Thanks

Regards

virverma · ‎10-26-2009

Configuring a Trunk,

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b06trunk.html#wp1127633

Trunk Configuration Settings for SIP Trunks

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/5_1_3/ccmcfg/b06trunk.html#wp1164882

Jaime Valencia · ‎10-26-2009

For clarification, there are NO SIP ICTs.

There are SIP trunks AND there are ICT non-GK controlled and GK controlled.

If what you want is to configure a connection between CUCM deployments then what you need is an ICT which provides the highest level of compatibility and that's the whole purpose of it's existence.

Technically you should be able to configure a SIP trunk between servers but the one you should use is an ICT GK or non GK controlled. If only 2 servers then use non-GK controlled.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate