10-27-2009 12:59 AM
A device is generating lots of events. When we have a look at them, memory is fine. I have read about "CSCsi10953 Bug Details DFM need way to show Insufficient Memory correctly for Modular IOS Switch" , but our DFM version is newer, LMS 3.1 with DFM 3.1.0.
Any suggestion? Threshold is 5%.
10-27-2009 05:36 AM
What type of device is this? What version of code is it running? This bug essentially added support for reporting on insufficient free memory for modular IOS switches.
10-27-2009 07:26 AM
Hi!
it's a Cisco Catalyst 6509 Switch:
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-VM), Version 12.2(33)SXH4, RELEASE SOFTWARE (fc1)
ROM: System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
SC_JZ_1_1 uptime is 4 days, 22 hours, 29 minutes
Uptime for this control processor is 4 days, 22 hours, 28 minutes
Time since SC_JZ_1_1 switched to active is 4 days, 22 hours, 28 minutes
System returned to ROM by power cycle at 16:12:07 UTC Tue Feb 17 2009 (SP by power on)
System restarted at 17:13:04 CET Thu Oct 22 2009
System image file is "sup-bootdisk:s72033-ipservicesk9_wan-vz.122-33.SXH4.bin"
cisco WS-C6509-E (R7000) processor (revision 1.4) with 516096K/8192K bytes of memory.
Processor board ID SMC130200MS
SR71000 CPU at 600Mhz, Implementation 1284, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
42 Virtual Ethernet interfaces
148 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
10-27-2009 07:34 AM
Post an SNMP Walk of 1.3.6.1.4.1.9.9.221 from this switch.
10-27-2009 07:46 AM
10-27-2009 07:50 AM
Post the details of the InsufficientFreeMemory event from this switch. That will help identify the pool in question.
10-27-2009 07:58 AM
10-27-2009 08:10 AM
Post the SNMP Walk output the next time it goes active. To me, it looks as though the event may be valid. Your processor free memory is too low.
10-27-2009 08:15 AM
What OID from the snmpwalk are you looking at??
10-27-2009 08:24 AM
I'm looking at the cempMemPoolUsed and cempMemPoolFree.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide