10-28-2009 03:30 AM - edited 03-06-2019 08:20 AM
Hi all;
I have a c3725 Version 12.3(11)T9 and 55K of NVRAM.
I want use flash instead of NVRAM.if possible tel me why I didin't find the IOS command "Boot config".
NB:I already use service compress-config.
MYROUTER#sh file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
- - opaque rw archive:
- - opaque rw system:
57336 776 nvram rw nvram:
- - opaque rw null:
- - network rw tftp:
* 128176128 128000000 disk rw flash:
32112636 2666600 flash rw slot0:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - network rw rcp:
- - network rw pram:
- - network rw ftp:
- - network rw http:
- - network rw scp:
- - network rw https:
- - opaque ro cns:
10-28-2009 06:38 AM
Hello habaoui,
the boot config is available for systems using filesystem type A.
see
see the following that describes filesystems
http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note09186a00800a7515.shtml#topic3
Hope to help
Giuseppe
10-29-2009 07:24 AM
Thanks for your reply.
But I can find the "boot config" in last ios version for my 3725.
Best regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: