Routing server

cisco-blue · ‎10-28-2009

Dear all,

my two routers configuration is like this ,

i m able to reach the 10.96.32.91 from Remote Router but not from the Main Router

Remote Router

Interface IP-Address OK? Method Status Prot

ocol

FastEthernet0/0 10.96.32.71 YES NVRAM up up

FastEthernet0/1 10.100.4.126 YES NVRAM up up

Serial0/0/0:0 10.100.2.142 YES NVRAM up up

------------------------------------

Gateway of last resort is 10.100.2.141 to network 0.0.0.0

10.0.0.0/8 is variably subnetted, 7 subnets, 4 masks

S 10.193.209.0/24 [1/0] via 10.100.2.141

S 10.193.208.0/24 [1/0] via 10.100.2.141

S 10.193.215.0/24 [1/0] via 10.100.2.141

C 10.100.4.64/26 is directly connected, FastEthernet0/1

C 10.96.32.0/24 is directly connected, FastEthernet0/0

C 10.100.2.140/30 is directly connected, Serial0/0/0:0

C 10.100.2.141/32 is directly connected, Serial0/0/0:0

S* 0.0.0.0/0 [1/0] via 10.100.2.141

----------------------------------------------

Main Router having the statis route

ip route 10.96.32.0 255.255.255.0 10.100.2.142

andrew.prince · ‎10-28-2009

try using extended ping from the main router, using the source IP of the serial interface connecting to the remote router.

If this works - you have a routnig issue, you need to double check both routing tables.

HTH>