10-28-2009 05:37 AM
Is there any way by which we can find the number of routes and number of received routes using snmpget.
OID - 1.3.6.1.4.1.9.9.187.1.2.4.1.1 gives us information about the routes accepted after appling filters. But is there and OID for received-routes for a neighbour.
10-29-2009 05:15 PM
May have to get two OIDs and use the sum of Accepted, Denied prefixes.
CISCO-BGP4-MIB::cbgpPeerAcceptedPrefixes.192.168.1.2.ipv4.unicast = Counter32: 15
CISCO-BGP4-MIB::cbgpPeerDeniedPrefixes.192.168.1.2.ipv4.unicast = Gauge32: 2
HTH,
Dan
10-30-2009 06:04 AM
Hi Dan,
Thanks, but I still have doubts if this will give the correct value.
If i have a neighbour 192.168.1.2.
enterprises.9.9.187.1.2.4.1.1.63.243.149.110.1.1 = Counter32:
But cbgpPeerDeniedPrefixes ( 1.3.6.1.4.1.9.9.187.1.2.4.1.2) gives relative value which is not euivalent to ( accepted+denied)
Suggestion ..
10-30-2009 08:35 AM
Could you post the values for these OIDs:
CISCO-BGP4-MIB::cbgpPeerAcceptedPrefixes.192.168.1.2.ipv4.unicast = Counter32: 15
CISCO-BGP4-MIB::cbgpPeerDeniedPrefixes.192.168.1.2.ipv4.unicast = Gauge32: 2
CISCO-BGP4-MIB::cbgpPeerPrefixAdminLimit.192.168.1.2.ipv4.unicast = Gauge32: 0
CISCO-BGP4-MIB::cbgpPeerPrefixThreshold.192.168.1.2.ipv4.unicast = Gauge32: 0
CISCO-BGP4-MIB::cbgpPeerPrefixClearThreshold.192.168.1.2.ipv4.unicast = Gauge32: 0
CISCO-BGP4-MIB::cbgpPeerAdvertisedPrefixes.192.168.1.2.ipv4.unicast = Gauge32: 17
CISCO-BGP4-MIB::cbgpPeerSuppressedPrefixes.192.168.1.2.ipv4.unicast = Gauge32: 0
CISCO-BGP4-MIB::cbgpPeerWithdrawnPrefixes.192.168.1.2.ipv4.unicast = Gauge32: 0
Also post the "Total number of prefixs" shown by the "show ip bgp neigh 192.168.1.2" command
Thanks,
Dan
11-05-2009 05:44 AM
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.1.192.168.1.2.1.1 = Counter32: 151
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.2.192.168.1.2.1.1 = Gauge32: 2521
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.3.192.168.1.2.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.4.192.168.1.2.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.5.192.168.1.2.1.1 = Gauge32: 0
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.6.192.168.1.2.1.1 = Gauge32: 2213402
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.7.192.168.1.2.1.1 = Gauge32: 108514
SNMPv2-SMI::enterprises.9.9.187.1.2.4.1.8.192.168.1.2.1.1 = Gauge32: 986169
sh ip bgp neighbors 192.168.1.2
Sent Rcvd
Prefix activity: ---- ----
Prefixes Current: 55785 151 (Consumes 8424 bytes)
Prefixes Total: 2213421 1822
Implicit Withdraw: 1220931 1649
Explicit Withdraw: 986180 22
Used as bestpath: n/a 34
Used as multipath: n/a 34
Saved (soft-reconfig): n/a 84 (Consumes 4368 bytes)
09-18-2011 05:34 AM
can you please guide me how can i get these statistics for IPv6 BGP peers?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide