10-28-2009 12:46 PM - last edited on 03-25-2019 07:53 PM by ciscomoderator
Does anybody knows if I need to apply a DST patch for this particular Version of Call manager, if so what is the patch description, thanks
10-28-2009 01:24 PM
Hello,
Please refer to the following link:
http://www.cisco.com/en/US/ts/fn/632/fn63213.html
But to answer your question, you need to be running at least 7.0.1.11002-1 or 7.0.1.21022-2 or higher.
Hope that helped, if so please rate.
10-28-2009 01:50 PM
So does this means that I can apply the patch or I dont need to apply any patch to my cluster?
10-28-2009 01:52 PM
You will need to upgrade to one of the versions that I mentioned or higher. To be safe I would just go with the latest version of 7.0.1.
Hope that helped, if so please rate.
10-29-2009 01:26 PM
so in few words i will need the DST patch, but before i do that i will have to upgrade the version of my cluster
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: