10-28-2009 01:17 PM - edited 03-10-2019 04:45 PM
Hi,
I configure 802.1x wich Cisco Switch and Microsoft NPS Radius but the client cannot connect. I debug radius on switch and receive the debug attached.
Whats the problem??
Thanks
10-28-2009 01:29 PM
Hi,
Looks like that switch ip address is 192.168.233.250
Please add this nas-ip-address 192.168.233.250 in the condition on the NPS server.
Also, could you please provide me a error message from the event viewer?
Attached is the document to configure NPS with cisco devices.
HTH
JK
Plz rate helpful posts-
10-28-2009 01:31 PM
10-29-2009 10:21 AM
I set everything equal to the document, but a receive the same error on Radius Debug
1w0d: RADIUS(00000048): Started 5 sec timeout
1w0d: RADIUS: Received from id 1645/51 192.168.233.16:1645, Access-Reject, len 44
1w0d: RADIUS: Response for non-existent request ident
Any idea???
Thanks
10-29-2009 11:04 AM
Hi,
I can clearly see that radius rejected the access-request that is why ia asked you to provide me the event viewer log message to get more detail.
Please get the event viewer log message for the access-reject.
HTH
JK
Plz rate helpful posts-
11-17-2010 07:22 AM
JK,
could you kindly repost pdf, it seems empty.
Thanks,
AS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide