10-28-2009 01:17 PM - edited 03-10-2019 04:45 PM
Hi,
I configure 802.1x wich Cisco Switch and Microsoft NPS Radius but the client cannot connect. I debug radius on switch and receive the debug attached.
Whats the problem??
Thanks
10-28-2009 01:29 PM
Hi,
Looks like that switch ip address is 192.168.233.250
Please add this nas-ip-address 192.168.233.250 in the condition on the NPS server.
Also, could you please provide me a error message from the event viewer?
Attached is the document to configure NPS with cisco devices.
HTH
JK
Plz rate helpful posts-
10-28-2009 01:31 PM
10-29-2009 10:21 AM
I set everything equal to the document, but a receive the same error on Radius Debug
1w0d: RADIUS(00000048): Started 5 sec timeout
1w0d: RADIUS: Received from id 1645/51 192.168.233.16:1645, Access-Reject, len 44
1w0d: RADIUS: Response for non-existent request ident
Any idea???
Thanks
10-29-2009 11:04 AM
Hi,
I can clearly see that radius rejected the access-request that is why ia asked you to provide me the event viewer log message to get more detail.
Please get the event viewer log message for the access-reject.
HTH
JK
Plz rate helpful posts-
11-17-2010 07:22 AM
JK,
could you kindly repost pdf, it seems empty.
Thanks,
AS
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: