WLAN 4402 for Radius Authentication

Answered Question
Oct 28th, 2009

Hi Guys,

Please help me on how I can set-up my WLAN controller 4402 for Radius authentication, if you have links or procedures that you can share, that will be very much appreciated. :-)

Thanks in advance.

I have this problem too.
0 votes
Correct Answer by Peter Nugent about 5 years 7 months ago

It depends if you are using Cisco ACS or Windows IAS. The controller config is the same but the RADIUS side is different.

Also what are you trying to configure, managemment users, PEAP etc via RADIUS

PEAP via ACS is here

http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a00807917aa.shtml

PEAP via IAS is here

http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a0080921f67.shtml

Hope that helps

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Correct Answer
Peter Nugent Wed, 10/28/2009 - 14:18

It depends if you are using Cisco ACS or Windows IAS. The controller config is the same but the RADIUS side is different.

Also what are you trying to configure, managemment users, PEAP etc via RADIUS

PEAP via ACS is here

http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a00807917aa.shtml

PEAP via IAS is here

http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a0080921f67.shtml

Hope that helps

gagamboy15 Sun, 11/01/2009 - 07:43

Thanks for the link, that would be a great help. :-)

Actions

Login or Register to take actions

This Discussion

Posted October 28, 2009 at 1:22 PM
Stats:
Replies:2 Overall Rating:5
Views:329 Votes:0
Shares:0
Tags: No tags.