10-29-2009 03:56 AM - edited 03-11-2019 09:33 AM
Hi Gentlemen,
I m new to ASA FW. I just tried to configure the ASA FW by using the ASDM. But I cannot lauch the ASDM login page.
I did the following procedure b4 login to ASDM page https://192.168.1.1/admin
( 1 ) ciscoasa# dir
Directory of disk0:/
61 -rwx 14635008 12:43:34 Sep 04 2009 asa803-k8.bin
2 drwx 4096 12:47:24 Sep 04 2009 log
63 drwx 4096 00:42:26 Nov 04 2005 syslog
6 drwx 4096 12:47:52 Sep 04 2009 crypto_archive
64 -rwx 5623108 13:01:34 Sep 01 2009 asdm-522.bin
ciscoasa(config)# asdm image disk0:/asdm-522.bin
( 2 ) ciscoasa(config)#http 192.168.1.21 255.255.255.255 management
( where 192.168.1.21 is laptop IP address )
( 3 ) ciscoasa(config)#http server enable
( 4 ) https://192.168.1.1/admin ( to launch the ASDM page using IE , mozilla, and made sure Pop Up is enable and java is enable)
I got the error " Web page cannot display " HTTP 404 error.
Kindly look at my ASA5510 as per attach.
10-29-2009 09:51 AM
Can you ping the management interface from your pc?
MAke sure you also generate a key "crypto key generate rsa mod 1024".
I hope it helps.
PK
10-30-2009 02:40 AM
Hi,
I even can telnet to the mgmt interface using 443.
Just tried "crypto key generate rsa mod 1024"." Same result.Thx.
10-29-2009 11:33 AM
Hi,
Can we get the output of the following:
debug http 255
Java logs from the machine on which we try and access ASDM.
Regards,
Manish
10-30-2009 02:37 AM
Hi ,pls.take a look at the output.
ciscoasa# debug http 255
debug http enabled at level 255.
ciscoasa# HTTP: processing GET URL '/admin' from host 192.168.1.21
HTTP: redirecting to: /admin/public/index.html
HTTP: processing GET URL '/admin/public/index.html' from host 192.168.1.21
HTTP: authentication not required
HTTP: file not found: public/index.html
10-30-2009 11:04 AM
Hi,
Please visit the following url and download asdm 6.2(1) version:
http://www.cisco.com/cgi-bin/apps/tblbld/tablebuild.pl/asa
Please upload this file to flash and enter the following command on the firewall:
asdm image flash:asdm-621.bin
For uploading the file to flash please follow the procedure as mentioned in the below given link:
This should fix the issue.
Regards,
Manish
11-05-2009 07:51 PM
Hi Gentlemen,
I ve manged to get the ASDM6.2 and uploaded it to the device and now able to access the device using the ASDM.
Really appreciate your professional advise.
10-30-2009 10:56 AM
I think you need ASDM version 6.x to connect with ASA version 8.x.
11-02-2009 06:30 AM
You need to have Device Manager Version 6.1(5)
Upload this image of asdm and
config t
no asdm image disk0:/asdm-522.bin
asdm image disk0:/asdm-615.bin
Reload the Firewall.
Also see that your java is updated.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: