Hi,
We have a MGCP controlled GW with call-manager-fallback for SRST, but when we disconnect the WAN the ATA do not fall back into SRST mode.
Config for MGCP and fall back -
ccm-manager redundant-host 10.18.100.4
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.18.100.4
ccm-manager config
!
mgcp
mgcp call-agent 10.18.100.5 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp rtp payload-type g726r16 static
!
mgcp profile default
call-manager-fallback
max-conferences 6 gain -6
transfer-system full-consult
limit-dn 7910 1
limit-dn 7935 1
limit-dn 7940 1
limit-dn 7960 2
limit-dn 7970 1
timeouts interdigit 6
ip source-address 10.18.241.9 port 2000
max-ephones 30
max-dn 30
system message primary Operating at Reduced Service
system message secondary Reduced Service
transfer-pattern .T
keepalive 10
voicemail 01875618191
no huntstop
moh music-on-hold.au
time-format 24
date-format dd-mm-yy
Any one any pointers to get the ATA registered when in fall back mode.
Thanks,
James
