upload ios to cisco 2611xm

Unanswered Question
Oct 30th, 2009

Hello,

i am interresting how to upload cisco 2611xm ios with requirements 256/64 Mb flash if the limit of cisco 2611xm is 254/32 Mb

thank you

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Fri, 10/30/2009 - 09:34

You have enough DRAM but not enough flash space to store the newer IOS . A lot of the newer 12.4 releases are bigger than 32 meg in size thus the requirement for 64 meg of flash. You would need to upgrade flash to a bigger size.

thotsaphon Fri, 10/30/2009 - 10:24

Sergey,

The maximum for 2611XM is 256/48.

Check these link out:

http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd800fa5be.html

http://www.cisco.com/en/US/docs/routers/access/2600/hardware/installation/notes/2600mem.html#wp93135

Edit: I'm not sure why the only IOS below needs 256/64. It might be wrong on the download page or the documents I provided are out of date. (grin)

INT VOICE/VIDEO, IPIP GW, TDMIP GW

c2600-ipvoice_ivs-mz.124-15.T10.bin

Release Date: 16/Sep/2009

Size: 25902.84 KB (26524500 bytes)

Minimum Memory: DRAM:256 MB Flash:64 MB

You will be fine with 256/48 if you are not a fan of IPIP GW. (J/K)

HTH,

Toshi

glen.grant Fri, 10/30/2009 - 11:43

If what you are saying is true then those "T" train images probably should not be under 2611XM . All the 2600XM boxes run the same images and say something like a 2651XM may have enough to run those . My advice would be to run a just the 12.4 mainline image in which case you have enough dram and flash for any image in the mainline train.

Actions

This Discussion