PBX error

Answered Question
Oct 31st, 2009
User Badges:

dear all

i have integrated a pbx with cisco 2811 router

the problem is when I dial from FXS router to PBX phone, the phone rings but when these phones wants to talk the connection will be broken

please help


Correct Answer by networkware about 7 years 7 months ago

provide this command


#isdn sending-complete


Usage Guidelines


The Sending Complete IE tells the switch that all the digits and information necessary for the call are contained in this Setup message.


Some switches in some countries want a Sending Complete information element to be included in the outgoing Setup message to indicate that the entire number is included. The Sending Complete IE is required in Hong Kong and Taiwan, and the isdn sending-complete command forces it to be sent.


please rate if helps




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
networkware Sat, 10/31/2009 - 05:35
User Badges:

provide this command


#isdn sending-complete


Usage Guidelines


The Sending Complete IE tells the switch that all the digits and information necessary for the call are contained in this Setup message.


Some switches in some countries want a Sending Complete information element to be included in the outgoing Setup message to indicate that the entire number is included. The Sending Complete IE is required in Hong Kong and Taiwan, and the isdn sending-complete command forces it to be sent.


please rate if helps




paolo bevilacqua Sat, 10/31/2009 - 06:16
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hmm... FXS connection, but an ISDN command supposedly resolves the issues !?!


Then, right away an high rating for a copy-and-paste !?!


Hmmm...





Actions

This Discussion