CUE7 - stops at boot-loader when reload

Unanswered Question
Oct 31st, 2009
User Badges:

Hi,


when reload the CUE module always stop at boot-loader but able to loading via "boot disk" command and works fine.


why CUE module always stop at boot-loader and any way to continut the booting? Is there similar concept to Router's "Configuration register is 0x2102"?


Advise please,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vkapoor5 Thu, 11/05/2009 - 14:17
User Badges:
  • Bronze, 100 points or more

What is the version of CUE running on this module? Is this NM, AIM or NME module?


paolo bevilacqua Thu, 11/05/2009 - 14:38
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Everything is configure at the boot loader, type help to see what the commands and settings are.

cjrchoi11 Thu, 11/05/2009 - 18:47
User Badges:

The "default boot" field was blank and that's why always stop in boot-loader. Works okay after enter "disk" on the field.

paolo bevilacqua Fri, 11/06/2009 - 09:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Very good, please remember to rate useful posts with the scrollbox below.

Actions

This Discussion