Allow remote telnet/SSH access to our Cisco Pix 515e?

whiteford · ‎11-01-2009

Hello,

How can I allow remote access via telnet and SSH to our Cisco Pix 515e? The remote comapny is giving me their external IP they will be coming from too, so we can lock it down to that IP.

Thanks

Amadou TOURE · ‎11-01-2009

Hi,

Please check out this link :

http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml

Hope this helps

Diego Armando Cambronero Arias · ‎11-01-2009

Telnet 255.255.255.255 OUTSIDE

SSH 255.255.255.255 OUTSIDE

AAA Authentication ssh console LOCAL

username cisco password cisco123

hdashnau · ‎11-01-2009

Please note you cannot telnet to the lowest security interface on the device (typically the OUTSIDE interface). SSH however would be allowed.

Diego Armando Cambronero Arias · ‎11-02-2009

that is correct u will need to configure IPSEC.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml#telnet