why user cant join the ap

Unanswered Question
Nov 2nd, 2009

now,when we use the wlc controll all the ap.sometimes,one ap can't accept any wireless user join it.so,we must reset the ap on the wlc.

why???

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
George Stefanick Mon, 11/02/2009 - 19:50

Have you checked the logs to see if the AP is failing..? What light are on the AP? Also are you running more than 1 controller, if so are the SSIDs config properly.

I recently had an issue where 1 controller had an SSID PSK that was off and the APs joined to that controller wouldnt join that SSID.

Just something to consider

QFX527518 Tue, 11/03/2009 - 18:59

thank.

in our company.only 1 controller.manage 1120/1130/1230 serial ap.

now,all lwap can join the controller,and user can join all the ap.but sometimes,one ap cant work right,because user cant join it.so ,we must reset the ap.after reset ap,user can join it.why

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode