Call Management

Unanswered Question
Nov 2nd, 2009

(1)Does callmanager has the capability of limiting the maximum number of hours that a user can make outbound call (PSTN) per month. (2)Does callmanager has the capability of limiting the duration of an initiated call to a defined period of time(eg 3 minutes). (3)If these are possible, I will appreciate if I can have the URL to get the materials to read up.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rob.huffman Mon, 11/02/2009 - 06:11

Hi Christian,

This setting is also applied to all Incoming and Outgoing CUCM calls;

Clusterwide Parameters (Feature - General)

Maximum Call Duration Timer :

This parameter specifies the minutes that a call can remain active before Cisco CallManager clears it. A value of zero disables the timer.

This is a required field.

Default: 720.

Unit: min.

Minimum: 0.

Maximum: 35791.

Hope this helps!



This Discussion