Status of cat6k secondary supervisor

Unanswered Question
Nov 2nd, 2009

Does anyone know whether the following output corresponds to the Hot standby Sup in slot 6 going into "unknown" status, when Module 2 is in fact unoccupied?


#show facility-alarm status


System Totals Critical: 1 Major: 0 Minor: 0


Source Severity Description [Index]

------ -------- -------------------

Physical Slot 2 CRITICAL Active Card Removed OIR Alarm [0]




Are there any syslog and/or SNMP monitoring options when Sups in SSO failover go into "simplex" mode?


#show redund


Redundant System Information :

------------------------------

Available system uptime = XX weeks, XX day, XX hours, 54 minutes

Switchovers system experienced = 0

Standby failures = 1

Last switchover reason = none


Hardware Mode = Simplex

Configured Redundancy Mode = sso

Operating Redundancy Mode = sso

Maintenance Mode = Disabled

Communications = Down Reason: Simplex mode


Current Processor Information :

-------------------------------

Active Location = slot 5

Current Software state = ACTIVE

Uptime in current state = XX weeks, XX day, XX hours, 54 minutes

Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(##)SXH#, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Thu 24-Jul-08 19:18 by prod_rel_team

BOOT = sup-bootdisk:s72033-advipservicesk9_wan-mz.122-##.SXH#.bin,1;slavesup-bootdisk:s72033-advipservicesk9_wan-mz.122-##.SXH#.bin,1;

CONFIG_FILE =

BOOTLDR =

Configuration register = 0x2102


Peer Processor Information :

----------------------------

Standby Location = slot 6

Current Software state = STANDBY HOT

Uptime in current state = XX weeks, XX day, XX hours, 54 minutes

Image Version = Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(##)SXH#, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Thu 24-Jul-08 19:18 by prod_rel_team

Configuration register = 0x2102


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion