Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
486
Views
0
Helpful
2
Replies

SNMP V3

Go to solution
dionjiles
Level 1
Level 1

‎11-02-2009 09:01 AM

Hi all,

I am in the process of migrating some of our devices to SNMP V3 per a network audit. Some of our devices do not support V3 only V2, what is the proper way of doing this and still be able to effectively manage devices via Ciscoworks?

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee

‎11-02-2009 09:24 AM

Nothing needs to be done really. LMS can completely support a mix of v3 and v2c. You just need to make sure the proper credentials are configured. Discovery can even try v3, then fallback to v2c then to v1 (LMS 3.2). Everything should be transparent to the end user.

View solution in original post

0 Helpful
2 Replies 2

Go to solution
Joe Clarke
Cisco Employee
Cisco Employee

‎11-02-2009 09:24 AM

Nothing needs to be done really. LMS can completely support a mix of v3 and v2c. You just need to make sure the proper credentials are configured. Discovery can even try v3, then fallback to v2c then to v1 (LMS 3.2). Everything should be transparent to the end user.

0 Helpful

Go to solution
dionjiles
Level 1
Level 1
In response to Joe Clarke

‎11-02-2009 09:43 AM

Thanks for the quick response....I got a test bed of network devices I configured and all seems to be working fine so far.

0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents