cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
488
Views
5
Helpful
4
Replies

DST issues in CM 6.1.2

chip.johannes
Level 1
Level 1

I upgraded to Call Manager 6.1.2 from 4.3 back in August. I had assumed that with the upgrade I would no longer have to deal w/ DST issues, but w/ the DST change this past weekend all of my phones are 1 hour fast. Does CM 6.1.2 have DST issues? If so is there a patch or do I need to change the time in the server.

4 Replies 4

kking2008
Level 1
Level 1

Yes you do.

CSCsy25150 - CUCM is not sending Daylight Saving Time updates

The versions below (and higher) have the fix:

5.x - 5. 1.3.7000.1 , 5.13.6104.1

6.1.x - 6.1.3.3000.1 , 6.1.3.2190.5, 6.1.3.2104.1, 6.1.2.1139.1,

6.1.3.3190.1, 6.0.x - 6.0.1.3119.1

7.0.x - 7.0.2.11004.2, 7.0.1.21022.2, 7.0.1.11002.1, 7.0.2.20000.2

You can download the different patches from the following link:

http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240

I have the same issue and I have version 6.1.2.1000-13. I don't see that specific version in the link or a higher 6.12 version. What am I missing on how to find these?

Hi Brian,

You are not losing it here. I don't see any 6.1(2) fixed-in versions either. I would open a case with TAC to see what is available for 6.1(2). Also have a look at this excellent doc from Wes Sisk @ Cisco, it doesn't look good :(

https://supportforums.cisco.com/docs/DOC-6199

Hope this helps!

Rob

The link to the bug id CSCsy33379 on the page you linked seems to indicate fixed in 6.1(2.1139.1) so I guess I will just try a TAC case as suggested.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: