LWAP to Autonomous conversion

Answered Question
Nov 3rd, 2009
User Badges:

Hi All,


I need to convert a "AIR-LAP1242AG-E-K9" to Autonomous Access Point.


I tried the following steps to convert the LWAP to Autonomous.


1. Assigned IP Address 10.0.0.3 to my laptop

2. Placed the IOS image in the cisco TFTP server "c1240-k9w7-tar.default"

3. Disabled all firewalls on my laptop

4. Switchoff the AP and pressed the reset button, and started the AP and released the reset button after 40 seconds

5. TFTP showed the attached error


Please let me know how could I convert the LWAP to Autonomous. I need to make it ASAP.



Attachment: 
Correct Answer by dancampb about 7 years 6 months ago

Make sure you the PC your TFTP server is running on is set to show known file extensions. If not even after you rename the image file the .tar extension is still there, just hidden.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
dancampb Tue, 11/03/2009 - 08:06
User Badges:
  • Cisco Employee,

Make sure you the PC your TFTP server is running on is set to show known file extensions. If not even after you rename the image file the .tar extension is still there, just hidden.

Actions

This Discussion