SPA941 Provisioning

Unanswered Question
Nov 3rd, 2009
User Badges:

I have a 50+ phone system using SPA941 phones. I have manually configured each phone and we are getting ready to launch more. I have successfully created an auto-provision master cfg file (spa941.cfg) and a phone specific cfg file (spa000e08d2ca16.cfg) - which in a test environment, utilizing TFTP downloaded and installed the provision settings correctly. I also indicated that the firware autoupdates from version 4.x (Sipura) to Cisco spa941-5-1-8.bin. I have also caught the DHCP OFFER packet in which I am using dhcp-option:66,"ip-address" - which is coming correctly thru (ironically on the bootp "server name" param). After updating the firmware - the phone has stopped auto-provissioning and will not retrieve the tftp server name (Profile Rule). I have done factory resets, hard boots, soft boots - you name it. I may have answered my own question, but has anyone ever encountered this? I may rollback to the original firmware...


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion