uBR10012 RFSwitch Protect Configuration

Unanswered Question
Nov 4th, 2009

Dear all,

I have deployed uBR10012 configuration, and the customer curios about protection module (for failover purpose).

http://www.cisco.com/en/US/docs/cable/cmts/feature/guide/uFGnpls1.html#wp1043487

on RFSwitch there are protection slot, one to the CMTS and the other to Cable Plant.

The question is :

1. rite now, protection cable that goes from RF Switch to cable plant not connected to the HFC Cloud. How the failover procedure goes ? is it we have to connect / combine all the interface to this protection slot, so protection slot from RFSwitch can aware / redirect traffic as soon as there a failure on HFC Cloud ?

2. uBR10012 connected to RFSwitch and module 5/1 act as protect card. Example : 6/0 down, both CMTS and RFSwitch redirect traffic to 5/1. Is the RF Switch can working like "6/0 cmts down, failover to protect card 5/1, RFSwitch still continue patching from 5/1 traffic goes to 6/0 to cable plant" ?

Thanks,

Budi L

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion