11-04-2009 11:05 AM
I would like to get the real time updates on end hosts on my switches. From reading other posts it sounds like I need to do the following:
1. Configure DHCP snooping on the switches.
2. Enable the mac notification traps on the switches and verify they are being sent to LMS.
I have catalyst 4000 and 4500 access switches. I've read that I may have problems with how LMS will handle the traps from the 4500 switches in this post: http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd34898
Has anyone had much luck in getting dynamic user tracking to work with the Catalyst 4500?
Solved! Go to Solution.
11-04-2009 12:09 PM
Not really. You'd have to run major acquisitions back to back to back, and that will just put too much strain on the server (and network).
11-04-2009 11:52 AM
No, it won't work right now. The Cat4500 code needs to be fixed first.
11-04-2009 12:01 PM
Thanks Joe. Any workarounds to get it anywhere near real time updates?
11-04-2009 12:09 PM
Not really. You'd have to run major acquisitions back to back to back, and that will just put too much strain on the server (and network).
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide