ASA-5505 and DSL - send PPP info

jdrose_2 · ‎11-04-2009

We're using an ASA-5505 and have switched to a DSL line that uses an ActionTec m1000 modem. To pass the static IP block straight through to the ASA the modem needs to be in bridging mode - but when it is a straight pass-through the modem does not send the ISP the PPP username and password to authenticate. Is there a way to configure the ASA to send the user name and password? Thanks!

kmccourt · ‎11-04-2009

Is this what you're after?

http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/pppoe.html

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080ab7ce9.shtml

jdrose_2 · ‎11-05-2009

That's exactly what I was looking for. Thanks!

Herbert Baerten · ‎11-04-2009

Yes, have a look here (or google "asa pppoe" :)):

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080ab7ce9.shtml