route leakage

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Fri, 11/06/2009 - 00:43

Hello Ola,

look if there is a vrf option in the command that specifies the source for SNMP traps

http://www.cisco.com/en/US/docs/ios/netmgmt/command/reference/nm_20.html#wp1024558

unfortunately I don't see this vrf option in command

snmp-server source interface as it happens in other commands

so actually a route leakage approach is needed in your case.

one way could be the following:

associate an ip subnet both to the VRF and to the GRT.

vlans X and Y connect with a crossover cable one access-port in vlan X with one port in vlan Y.

and

ip route trap-server 255.255.255.255 vlanX

snmp-server source interface vlan X

Hope to help

Giuseppe

Actions

This Discussion