11-05-2009 10:01 AM - edited 03-21-2019 09:20 AM
We are installing a spa8k unit and connecting to a Nortel Norstar key system. We are having issues with the Norstar showing the line ringing in. We have changed the ring wave form from Trapezoid to Sinusoid and messed with the ring voltage. Has anyone ever interfaced with a Norstar and have any recommended settings, etc
Thanks
Jayme
11-10-2009 05:13 PM
Hi Jayme,
I've asked my colleagues and nobody has specific settings for the Nortel Norstar system.
Does a phone attached to the spa8k ring?
What are you attempting to accomplish by modifying the ring's wave form?
Regards,
Patrick
----------
11-10-2009 05:22 PM
Hi Jayme,
Do you have a manual or any specifications of the Nortel Norstar key system? If so, I'll request Engineering to take a look and perhaps that will provide clues to appropriate settings for the SPA8000.
Regards,
Patrick
-----------
11-13-2009 12:40 PM
Patrick,
Thanks for the update on this. We actually got the 8k working with the default settings. We actually had a bad port, which is the one we were using.
Jayme
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide