PIX error?

Unanswered Question

ip address outside 131.211.156.130 255.255.255.224

ip address inside 192.168.7.1 255.255.255.0

global (outside) 1 interface

global (outside) 1 131.211.156.131

nat (inside) 1 0.0.0.0 0.0.0.0 0 0

static (inside,outside) 131.211.156.145 192.168.100.145 netmask 255.255.255.255 0 0

route outside 0.0.0.0 0.0.0.0 131.211.156.129 1

route inside 192.168.6.0 255.255.255.0 192.168.7.2 1

route inside 192.168.100.0 255.255.255.0 192.168.7.2 1

131.211.156.145 is web server。

client 192.168.6.x Cannot access the Web server.

Internet users access to normal.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mkharban Tue, 11/10/2009 - 14:32

Hi,

For achieving this we would require hairpining on the firewall. For the ip address command mentioned above it seems that you are running 6.x code on the firewall.

We need to upgrade the firewall to at least 7.2(4) version to configure u-turning or hairpining on it.

Please find below the relevant link explaining hairpining:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml#solution2

Actions

This Discussion