11-09-2009 03:26 AM - edited 03-06-2019 08:30 AM
Hi,
Is it possible to setup add another endpoint in an existing QinQ setup?
Today we have a QinQ setup between to ports on different switches in our network. Now we want to add another port/switch to the same QinQ setup.
Solved! Go to Solution.
11-09-2009 03:56 AM
Hello Mats,
to implement an hub and spoke topology with three sites you need to build two QinQ tunnel with two ports used at central site (hub)
otherwise you have a full-mesh
Hope to help
Giuseppe
11-09-2009 03:56 AM
Hello Mats,
to implement an hub and spoke topology with three sites you need to build two QinQ tunnel with two ports used at central site (hub)
otherwise you have a full-mesh
Hope to help
Giuseppe
11-09-2009 05:14 AM
Thx Giuseppe for a quick reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide