Solved: CME to CME integration

cris_jimenez · ‎11-09-2009

hello folks

do you know or could you share a document that will explain cme to cme integration ?

thank you

Kenneth Mohammed · ‎11-09-2009

Basically, you would just have dial-peers on each cme pointing to the remote site:

example:

California router

dial-peer voice 100 voip

description **Calls to Indianapolis**

destination-pattern ....(extensions in Indy)

session target ipv4:x.x.x.x (IP of Indy router)

dtmf-relay h245-alphanumeric

Indy router

dial-peer voice 100 voip

description **Calls to California**

destination-pattern ....(extensions in Cali)

session target ipv4:x.x.x.x (IP of Cali router)

dtmf-relay h245-alphanumeric

Hope that helped, if so please rate.

View solution in original post

Kenneth Mohammed · ‎11-09-2009

Hello,

Can you be more specific? Are you just trying to network CME's at 2 different sites? Please explain further.

cris_jimenez · ‎11-09-2009

yes

I'd like to integrate 2 CME systems in 2 different locations

Indianapolis, California

there's going to be a VPN tunnel between the 2 sites and I'd like to have 4 digit dialing between the 2 sites

the site in indianapolis currently has cme version 4.2, the site in california has cme version 4.1

and i think i may need a GK for BW control, but i'm not sure i haven't found something that will explain how to integrate the 2 systems together

Kenneth Mohammed · ‎11-09-2009

Basically, you would just have dial-peers on each cme pointing to the remote site:

example:

California router

dial-peer voice 100 voip

description **Calls to Indianapolis**

destination-pattern ....(extensions in Indy)

session target ipv4:x.x.x.x (IP of Indy router)

dtmf-relay h245-alphanumeric

Indy router

dial-peer voice 100 voip

description **Calls to California**

destination-pattern ....(extensions in Cali)

session target ipv4:x.x.x.x (IP of Cali router)

dtmf-relay h245-alphanumeric

Hope that helped, if so please rate.

cris_jimenez · ‎11-10-2009

hello,

I configured the dial-peers however i can only call the phones from california to indy. if i try to call from indy to california i get fast busy ... what am i doing wrong ?

cris_jimenez · ‎11-10-2009

problem resolved

thanks

tomboyadefila · ‎11-11-2009

how did you resolve it

cris_jimenez · ‎11-12-2009

I did a debug voice ccapi inout and realize that when i was placing the call it was actually getting to the remote ccme however the incoming dial-peer was wrong i reconfigure it and it fix my issue