Common services 3.1.1 Process problem

Answered Question
Nov 10th, 2009
User Badges:

Hi,


Some of the process such as CS Discovery,EDS-TR,FH Purge task,in common services 3.1.1 are never started and also transient terminated even though when i manually go and start them.


CVDeviceSelector.log is not rotating after specifying in below command:


NMSROOT\bin\perl NMSROOT\bin\logrot.pl -c


for rotation:running logrot


D:\progra~1\cscopx\bin\perl D:\progra~1\cscopx\bin\logrot.pl -s


Attached is the log file for process of LMS 3.0.1 with common services 3.1.1



Attachment: 
Correct Answer by Joe Clarke about 7 years 8 months ago

No, EDS-TR should never run, and FHPurge is only run periodically. It is quite common to see it as never started.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Tue, 11/10/2009 - 08:47
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

These process should be down in normal operation. CSDiscovery is a transient process that only runs when a Discovery is running. When Discovery ends, the CSDiscovery process will be in transient terminated. Do NOT try and start these processes manually.


Start a new thread for the logrot question.

lambay2000 Wed, 11/11/2009 - 05:41
User Badges:

Hey Joe,


what about EDS-TR and FH Purge process they are shown as never started though i have seen them as normal operation before facing this problem.


thanks

Correct Answer
Joe Clarke Wed, 11/11/2009 - 08:09
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

No, EDS-TR should never run, and FHPurge is only run periodically. It is quite common to see it as never started.

Actions

This Discussion