Router Error

okhan32bj · ‎11-10-2009

When I boot the 2600 router i receive the message below:

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

C2600 platform with 32768 Kbytes of main memory

open: file "/c2600-j1s3-mz.123-26.bin" not found

open(): Open Error = -1

loadprog: error - on file open

boot: cannot load "flash:/c2600-j1s3-mz.123-26.bin"

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

C2600 platform with 32768 Kbytes of main memory

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

C2600 platform with 32768 Kbytes of main memory

boot: cannot determine first file name on device "flash:"

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

C2600 platform with 32768 Kbytes of main memory

rommon 1 >

slmansfield · ‎11-10-2009

It appears that you do not have a valid IOS image on the flash.

Here is a URL that demonstrates how to TFTP an image to a 2600. I have used this and it works very well.

Here is a URL describing boot problems and how to resolve them.

HTH

slmansfield · ‎11-10-2009

Sorry, I didn't include the URL

slmansfield · ‎11-10-2009

Here is some additional information about how to check flash from ROMMON mode to see what, if any, image is on the flash and boot from that image.