AP1252G - conversion to LAP

Answered Question

Hello!


Sorry, but i can't find LAP rcv ios for the AP1252G in the wireless support download section for 1250ser. Does c1200-rcvk9w8-tar.123-7.JX9.tar from 1200 download section applicable for 1252 series?


Thank you!

Correct Answer by Robert.N.Barrett_2 about 7 years 6 months ago

The links in Scott's answer appear not to work (for me at least). This one might:


http://tools.cisco.com/support/downloads/go/DownloadCart.x?imageGuId=119CF96B332B0889DB88E22CA711A1AC1E5DFC60


Also - Scott's instructions mention setting an IP address on the AP when using the "hold the mode button for 30 seconds" route. I don't believe that an IP address is necessary on the AP under those circumstances (based on few that I've done).

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Rob Huffman Tue, 11/10/2009 - 08:50
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Correct Answer
Robert.N.Barrett_2 Tue, 11/10/2009 - 14:35
User Badges:
  • Bronze, 100 points or more

The links in Scott's answer appear not to work (for me at least). This one might:


http://tools.cisco.com/support/downloads/go/DownloadCart.x?imageGuId=119CF96B332B0889DB88E22CA711A1AC1E5DFC60


Also - Scott's instructions mention setting an IP address on the AP when using the "hold the mode button for 30 seconds" route. I don't believe that an IP address is necessary on the AP under those circumstances (based on few that I've done).

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode