cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
318
Views
0
Helpful
3
Replies

Call Routing by Calling Number

Hi

Someone configurated call routing based on the calling number with CallManager 5.x? I need to distinguish between destination gateways(H.323) based on origin.

Thanks

Peterson

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Ola' Peterson,

For example:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

Concept is the same, just reversing Dial-peer types. You can also achieve the same using COR, and no number manipulation.

Ola' Paulo

Sorry, give-me explain better

The customer has various sites (example A,B,C,D), with centralized callmanager cluster. A site (B) lost the wan connection, so the extensions is unregistered on CCM. This phone is configured with CSS on Forward Unregistred on CallManager.

So I want that when another site calls the phones on site B (unregistered), the calls send to PSTN by gateway on local site by PSTN

Thanks

Peterson

In that case I think you have to use partitions and route lists, but I'm not a CM expert.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: