11-10-2009 09:48 AM - edited 03-15-2019 08:26 PM
Hi
Someone configurated call routing based on the calling number with CallManager 5.x? I need to distinguish between destination gateways(H.323) based on origin.
Thanks
Peterson
11-10-2009 09:52 AM
Ola' Peterson,
For example:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml
Concept is the same, just reversing Dial-peer types. You can also achieve the same using COR, and no number manipulation.
11-10-2009 10:03 AM
Ola' Paulo
Sorry, give-me explain better
The customer has various sites (example A,B,C,D), with centralized callmanager cluster. A site (B) lost the wan connection, so the extensions is unregistered on CCM. This phone is configured with CSS on Forward Unregistred on CallManager.
So I want that when another site calls the phones on site B (unregistered), the calls send to PSTN by gateway on local site by PSTN
Thanks
Peterson
11-10-2009 10:08 AM
In that case I think you have to use partitions and route lists, but I'm not a CM expert.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: