Problem whit port console for ACS in switch 2950-XL!

Unanswered Question
Nov 10th, 2009
User Badges:

I set a Catalyst 2950 switch to the console port authentication is THROUGH the ACS, in case of failure to use the local user base, works well.


the problem is with a 2950-XL switch, which does not support the command aaa authorization console, I can do?


the configuration is:


username admin privilege 15 password 0 123456


aaa authentication login default group tacacs+ local

aaa authentication login CONSOLE local

aaa authorization config-commands

aaa authorization exec default group tacacs+ local

aaa authorization exec CONSOLE local

aaa authorization commands 0 default group tacacs+ if-authenticated

aaa authorization commands 1 default group tacacs+ if-authenticated

aaa authorization commands 15 default group tacacs+ if-authenticated

aaa accounting exec default start-stop group tacacs+

aaa accounting commands 0 default start-stop group tacacs+

aaa accounting commands 15 default start-stop group tacacs+

aaa accounting connection default start-stop group tacacs+

aaa accounting system default start-stop group tacacs+


line con 0

authorization exec CONSOLE

login authentication CONSOLE


i try to access the switch:


Username: admin

Password: ******


SWAdmin5>en

Password:

% Access denied


SWAdmin5>


suggestions friends "

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jagdeep Gambhir Wed, 11/11/2009 - 12:38
User Badges:
  • Red, 2250 points or more

I guess you have 2900XL switch. CAT 2950 do support this command.


The problem is that the XL switches do not support this command.



Regards,

~JG


Do rate helpful posts



Actions

This Discussion