Cisco ACS v5.0 with PEAP-MSCHAPv2

Unanswered Question
Nov 10th, 2009
User Badges:

I am have problems setting up the Cisco ACS server with PEAP-MACHAPv2. Does any one have a step by step guide to help with this issue..

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jrabinow Tue, 11/10/2009 - 12:34
User Badges:
  • Cisco Employee,

I do not have a step by step guide to hand. A few things that come to mind are

1) Define netwrok device

2) Set allowed protocols in service definition and select identity store

3) Install server certificate


One good way to trouble shoot such issues is to Monitoring & Reports: > Reports > Catalog > AAA Protocol

and then select "RADIUS_Authentication"


You will see pass/fail records. For each fail record see failure reason. Also select magnifying glass icon under "Details" and will get step-by-step details so that should see step where processing was stopped and failure returned. Will give input to see what configuration is missing


Actions

This Discussion