What IOS on Supe 720 for BRIDGED Netflow stats

Unanswered Question
Nov 10th, 2009
User Badges:

Hello,


I have CAT 6500's with Supe 720's. Netflow is working on L3+ packets, but bridged traffic not showing up. Read several articles on this and THOUGHT I have the correct IOS train and ver, but still no love.


Any help on this would be great!


TIA!


Gary


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ggatten Tue, 11/10/2009 - 12:05
User Badges:

$hit! I have 12.2(33)SXI1, but my PFC is rev A!


For future reference, does the modular or monolythic IOS matter at all, or as long as my hardware is good and the IOS ver OK - I should be OK?

Bobby Thekkekandam Tue, 11/10/2009 - 12:14
User Badges:
  • Cisco Employee,

Yes, Modular or Monolithic IOS should be the same in terms of feature support

(except for those features specific to modular IOS such as restarting processes, etc.)


HTH,


Bobby


Giuseppe Larosa Tue, 11/10/2009 - 12:01
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Gary,

an explicit command is needed:


Router(config)# ip flow export layer2-switched vlan vlan_ID[-vlan_ID] [, vlan_ID[-vlan_ID]]


see


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/nde.html#wp1140743


release after 12.2(18)SXE should be fine


Hope to help

Giuseppe


ggatten Tue, 11/10/2009 - 12:10
User Badges:

Yes, I have added the explicit command for L2 flows, but looks like my PFC3A is the issue....


Can you even upgrade the PFC's by themselves, or does the whole supe / MSFC need upgraded?

ggatten Tue, 11/10/2009 - 12:14
User Badges:

Quick google shows the PFC CAN be upgraded by itself. Thanks for the prompt replies!

Giuseppe Larosa Tue, 11/10/2009 - 12:20
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Gary,

I had missed the part about PFC version...

sorry for that


this question has been discussed multiple times in the forum:


you should been able to:

add memory to RP and SP

and

to replace PFC3A with a PFC3B.


see

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/OL_20611.html


and for PFC3B installation


http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_16220.html




Hope to help

Giuseppe


Actions

This Discussion