×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco VPN Client, tunnel is up no transmision from client to internal netwo

Unanswered Question
Nov 10th, 2009
User Badges:

Hello


I have problem with on VPN Tunnel.

I have ASA5510 in HQ and Pix501 in Branch Office.

IP Address in HQ 192.168.0.0 mask 255.255.252.0


I make using IPSec VPN Wizzard (in ASDM 6.2) a tunnel. Tunnel type: Remote Access (name VPN1)IP Pool: VPN1 192.168.10.1-192.168.10.254


Branch Office can connect to HQ (tunnel is up andnsmission is ok, ping, rdp, etc.)


I make a second tunnel using IPSec VPN Wizzard (name VPN2) for users using Cisco VPN Client, IP pool 192.168.95.1-192.168.95.254


i can connect to HQ(tunnel is up) when i use Cisco VPN client but remote client can't ping,rdp etc. to inside network.

When i try to ping or rdp from inside network to Remote client, i can.


Pleas help

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion