I have a WRVS4400N router and I recently tried to upgrade the firmware from V1.1.13 to V2.0. When I perform the upgrade it gets to about 4% and then I get this message.
"Upgrade file is not the correct type or version for this device. Upgrade failed. Please obtain the correct file and try again."
I thought it might have been a corrupt file so I downloaded the file again to a different computer and the results were the same. If anyone can help I would appreciate it.
The zip file I downloaded was
The file I used to upgrade was
|CPU:||STAR 9202||FLASH :||8MB|
|System up time:||70 days, 07:10:28|
At the cisco.com website, you can download the ips signature 1.41. That should upgrade your ips on your router.
IPS signatures should be able to be used across hardware version platforms.
There are 2 hardware versions of the WRVS4400N. The version 1.0 and 1.1 use different firmware than the version 2 platform.
Going on the version number of firmware on your router, you have either a version 1.0 or 1.1 device and the firmware you are trying to upload to the router will not work. It is specifically for the version 2 platform.
Firmware version 1.1.13 is the most current firmware available for your router.