11-10-2009 10:58 PM - edited 03-15-2019 08:27 PM
How I can call from CME to CUCM IP phone?
What I need to configure? Some trunk or add CME like H.323 Gateway on CUCM?
Please advise me the best practise to resolve this question.
Thank you a lot!
11-10-2009 11:01 PM
Exactly, add the CME as H.323 Gateway at CUCM, add a voip dial peer at CME with session target IP to CUCM, that's all.
11-11-2009 09:41 PM
Hello,
Can SP trunk be used. because i used a SIP trunk and i can only call from the UCM to CME. i can not call from CME to UCM
thanks for the anticipated response
11-11-2009 09:53 PM
Hi, As said above you need a sip VOIP dialpeer pointing to the CUCM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide