SSH - 2960Sw

Unanswered Question
Nov 11th, 2009

Hi

Can ssh be applied on Cisco 2960. Are configuration commands same similar to Router.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Collin Clark Wed, 11/11/2009 - 07:35

Yes it can, you may need the crypto image though. Here are the commands to configure SSH.

Switch(config)#hostname SwitchOne

SwitchOne(config)#ip domain-name mydomain.com

SwitchOne(config)#crypto key generate rsa

Enter modulus: 1024

SwitchOne(config)#ip ssh time-out 60

SwitchOne(config)#ip ssh authentication-retries 2

SwitchOne(config)#line vty 0 4

SwitchOne(config-line)#transport input ssh

SwitchOne(config-line)#^Z

SwitchOne#write memory

iyde Wed, 11/11/2009 - 14:32

Hi.

You _do_ need the crypto image. It's the ones with a k9 in the image name, i.e. c2960-lanbasek9-mz.xxxx

HTH, Ingolf

Actions

This Discussion