11-11-2009 08:47 PM - edited 03-15-2019 08:29 PM
I am adding a new subscriber to a Call Manager 4.2(3) Cluster, and during the setup, I have to enter the passwords for the following...
- SA (SQL Server system administrator) password
- Directory Manager (DC Directory) password
- Private Password Phrase for the Cluster
I have a password for each one, and I think it is correct, but I have no way to know for sure.
Is there somewhere I can go on the Publisher or on any of the existing Subscribers to test the password that I have for each of these three?
Thanks,
David
Solved! Go to Solution.
11-12-2009 09:33 AM
Hi David,
I would just go ahead and use the ones that you have. If there is a problem the install will let you know and you can use the tool shown below to re-sync the passwords;
This tool should only be used during Off-Production Hours.
From this excellent Tech Note;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080557ba5.shtml
Also check out;
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K96486351
Cheers!
Rob
11-12-2009 09:33 AM
Hi David,
I would just go ahead and use the ones that you have. If there is a problem the install will let you know and you can use the tool shown below to re-sync the passwords;
This tool should only be used during Off-Production Hours.
From this excellent Tech Note;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080557ba5.shtml
Also check out;
http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K96486351
Cheers!
Rob
11-12-2009 05:32 PM
Thank you very much Rob.
From your links, I also found a click through to this link: http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K20914488
It covers the SA account, which is very handy.
Thanks again!
David
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: