Router restart-serial line struck off

Unanswered Question
Nov 12th, 2009
User Badges:

Dear all,


help me its urgent



our 2811 router is connecte to PSTN Telco for Provisioning

at Serial Line on 0/1/1 through smart serial for the following configuration


interface Serial0/1/1

physical-layer async

no ip address

encapsulation slip

async mode interactive

line 0/1/1

login authentication prov

transport input all

transport output all

telnet transparent

stopbits 1

flowcontrol software

------------------------------------


with the command

telnet 10.100.0.37 2019


i could not get the link, i have to clear line 0/1/1 or restart the router

is there any remedy other than this

----------------------------------------------

ports open are like this 2887,54729)no where there is 2019,



ROUTER#sh ip sockets

Proto Remote Port Local Port In Out Stat TTY OutputIF

17 --listen-- 10.100.0.43 2887 0 0 11 0

17 0.0.0.0 0 10.100.0.43 67 0 0 2211 0

17 10.193.208.183 53527 10.100.0.11 161 0 0 1 0

17 --listen-- 10.100.0.43 162 0 0 11 0

17 --listen-- 10.100.0.43 54729 0 0 1 0

17 10.193.208.181 162 10.100.0.11 49717 0 0 0 0

17 10.193.208.183 162 10.100.0.11 54603 0 0 0 0

Proto Remote Port Local Port In Out Stat TTY OutputIF

17 10.193.208.247 162 10.100.0.11 58347 0 0 0 0

17 10.193.208.249 162 10.100.0.11 49818 0 0 0 0

17 10.193.209.41 162 10.100.0.11 58574 0 0 0 0

17 10.193.209.5 162 10.100.0.11 55960 0 0 0 0

17 10.193.219.64 514 10.100.1.54 50341 0 0 210 0

17 10.193.212.112 514 10.100.1.54 50097 0 0 210 0

17 10.193.212.112 162 10.100.0.11 58766 0 0 0 0

Proto Remote Port Local Port In Out Stat TTY OutputIF

17 10.193.219.64 162 10.100.0.11 53191 0 0 0 0


---------------------------


any other command i have to give on serial to workout like

absolute-timeout Set absolute timeout for line disconnection

dispatch-timeout Set the dispatch timer


exec-timeout Set the EXEC timeout


lockable Allow users to lock a line


logout-warning Set Warning countdown for absolute timeout of line


notify Inform users


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Thu, 11/12/2009 - 03:13
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Cisco_blue,


try

line 0/1/1

no exec



Hope to help

Giuseppe


Actions

This Discussion