11-12-2009 12:13 AM - edited 03-04-2019 06:40 AM
Dear all,
help me its urgent
our 2811 router is connecte to PSTN Telco for Provisioning
at Serial Line on 0/1/1 through smart serial for the following configuration
interface Serial0/1/1
physical-layer async
no ip address
encapsulation slip
async mode interactive
line 0/1/1
login authentication prov
transport input all
transport output all
telnet transparent
stopbits 1
flowcontrol software
------------------------------------
with the command
telnet 10.100.0.37 2019
i could not get the link, i have to clear line 0/1/1 or restart the router
is there any remedy other than this
----------------------------------------------
ports open are like this 2887,54729)no where there is 2019,
ROUTER#sh ip sockets
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 --listen-- 10.100.0.43 2887 0 0 11 0
17 0.0.0.0 0 10.100.0.43 67 0 0 2211 0
17 10.193.208.183 53527 10.100.0.11 161 0 0 1 0
17 --listen-- 10.100.0.43 162 0 0 11 0
17 --listen-- 10.100.0.43 54729 0 0 1 0
17 10.193.208.181 162 10.100.0.11 49717 0 0 0 0
17 10.193.208.183 162 10.100.0.11 54603 0 0 0 0
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.193.208.247 162 10.100.0.11 58347 0 0 0 0
17 10.193.208.249 162 10.100.0.11 49818 0 0 0 0
17 10.193.209.41 162 10.100.0.11 58574 0 0 0 0
17 10.193.209.5 162 10.100.0.11 55960 0 0 0 0
17 10.193.219.64 514 10.100.1.54 50341 0 0 210 0
17 10.193.212.112 514 10.100.1.54 50097 0 0 210 0
17 10.193.212.112 162 10.100.0.11 58766 0 0 0 0
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.193.219.64 162 10.100.0.11 53191 0 0 0 0
---------------------------
any other command i have to give on serial to workout like
absolute-timeout Set absolute timeout for line disconnection
dispatch-timeout Set the dispatch timer
exec-timeout Set the EXEC timeout
lockable Allow users to lock a line
logout-warning Set Warning countdown for absolute timeout of line
notify Inform users
11-12-2009 03:13 AM
Hello Cisco_blue,
try
line 0/1/1
no exec
Hope to help
Giuseppe
11-12-2009 05:29 AM
no it isnt working,
any other remedies
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: