Busy signal with incoming calls.

Unanswered Question
Nov 12th, 2009

Hi all, I have a problem with the incoming calls. I hear only one tone and the next a busy signal. I don't know if the configuration is correct, the outgoing calls working fine.

The configuration of dial-peer.

voice-port 2/0

translate called 1

supervisory disconnect anytone

cptone ES

timeouts initial 3

timeouts interdigit 3

bearer-cap Speech

!

voice-port 2/1

!

dial-peer cor custom

!

!

!

dial-peer voice 1 pots

preference 1

destination-pattern T

progress_ind setup enable 3

progress_ind alert enable 8

direct-inward-dial

port 2/0

!

dial-peer voice 3 voip

preference 1

destination-pattern 918762551

voice-class codec 1

voice-class h323 1

session target ipv4:192.168.0.14

dtmf-relay h245-alphanumeric

no vad

Many Thanks for all.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion